o2 Installation Kit

o2 Installation Kit

When combined with a set of wideband O2 sensors (such as our TRO2), the O2 installation kit allows you to get the most accurate readings so you can get the best possible results out of your tune. After the easy installation (no welding required), you can monitor both cylinders simultaneously and measure exhaust correctly with no false readings.


  • Dump the Pump - No Pump or Sampling Tube Required
  • Monitor Both Cylinders Simultaneously
  • Measure Exhaust Gas Correctly
  • No Reversion Air giving false lean readings
  • Fast, Accurate Reading with almost no delay
  • Easy Installation - No Welding Required
  • Can be used with Dynamometer or Portable Data Logger
  • When Done, Heat Shield covers seal screws maintains original look.


  • 2 - O2 Sampler Blocks
  • Special Attachment Bolts
  • Exhaust Port Jet
  • 1- Hydraulic Insertion Tool (with case)
  • 2 - 5-foot exhaust hoses
  • 1 - Drill Bit
  • 25 - Rivnuts
  • 25 - Seal Screws
  • 25 - Seal Washers
All products are shipped with signature required, customer must be available for signature. Please contact us directly for alternative options.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.